The specific Galaxy A20 SM-A205G U11 Firmware Download Package comes with a Stock ROM of Galaxy A20 SM-A205G U11 Security Patch Level 2023-03-01 (March 1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A20 SM-A205G Binary 11 Android 11 Mexico Telcel TCE A205GUBUBCWD6
There are various reasons to flash “Stock Firmware on Galaxy A20 SM-A205G U11“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A20 SM-A205G U11
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy A20 SM-A205G U11 Stock ROM Details:
SM-A205G U11 Mexico Telcel TCE A205GUBUBCWD6:
| Model | SM-A205G Binary 11 U11, S11, Bit 11 |
| Region / Country | Mexico |
| Language | Multi-Language |
| Android version | Android 11 R |
| Operator / Operator / Carrier | Telcel TCE |
| AP / PDA | A205GUBUBCWD6 |
| CSC | A205GOWABCWD6 |
| Modem CP Version / Baseband | A205GNDXUBCWD6 |
| product code | TEC |
| Build Date | 2023-04-13 |
| Security Patch Level | 2023-03-01 (March 1, 2023) |
| Size | 3.9 GB |
| Download | Google Drive |
Other Firmware For SM-A205G:
- Galaxy A20 SM-A205G Binary 8 Firmware
- Galaxy A20 SM-A205G Binary 9 Firmware
- Galaxy A20 SM-A205G Binary 10 Firmware
How To Install Galaxy A20 SM-A205G U11 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer. If the Samsung USB Driver is already installed on your computer, Skip this Step.
2: Download and extract the Galaxy A20 SM-A205G U11 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed you will see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A20 SM-A205G U11 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A20 SM-A205G U11 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.