The specific Galaxy A20 SM-A205G/DS U11 Firmware Download Package comes with a Stock ROM of Galaxy A20 SM-A205G/DS U11 Security Patch Level 2023-03-01 (March 1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A20 SM-A205G/DS Binary 11 Android 11 Brazil ZTO A205GUBUBCWD6
There are various reasons to flash “Stock Firmware on Galaxy A20 SM-A205G/DS U11“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A20 SM-A205G/DS U11
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy A20 SM-A205G/DS U11 Stock ROM Details:
SM-A205G/DS U11 Brazil ZTO A205GUBUBCWD6:
Model | SM-A205G/DS Binary 11 U11, S11, Bit 11 |
Region / Country | Brazil |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | Clean ZTO (no logo, carrier apps) |
AP / PDA | A205GUBUBCWD6 |
CSC | A205GOWOBCWD6 |
Modem CP Version / Baseband | A205GNDXUBCWE1 |
product code | ZTO |
Model References | SM-A205GZRJZTO, SM-A205GZKJZTO, SM-A205GZBJZTO |
Build Date | 2023-04-13 |
Security Patch Level | 2023-03-01 (March 1, 2023) |
Size | 4GB |
Brazil ZTO | Mega Google Drive |
Brazil Vivo ZVV | Mega Google Drive |
How To Install Galaxy A20 SM-A205G/DS U11 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A20 SM-A205G/DS U11 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode a Warning Yellow Triangle Sign appeares . Press Volume Up to proceed.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A20 SM-A205G/DS U11 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A20 SM-A205G/DS U11 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.