Galaxy A20 SM-A205F U7 Firmware – Android 9 Pie
The specific Galaxy A20 SM-A205F U7 Firmware Download Package has a Stock ROM of Galaxy A20 SM-A205F U7 Security Patch Level 2020-02-01 (February 1, 2020). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A20 SM-A205F Binary 7 Android 9 Pie South Africa XFA A205FXXU7ATB2
There are various reasons to flash “Stock Firmware on Galaxy A20 SM-A205F U7“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A20 SM-A205F U7
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A20 SM-A205F U7 Stock ROM Details:
SM-A205F U7 South Africa XFA A205FXXU7ATB2:
Model | SM-A205F Binary 7 U7, S7, Bit 7 |
Region / Country | South Africa |
Language | Multi-Language |
Android version | Android 9 Pie |
Operator / Carrier | Clean XFA (no logo, carrier apps) |
PDA | A205FXXU7ATB2 |
CSC | A205FOJM7ATB1 |
MODEM CP Version | A205FDDU7ATB2 |
product code | XFA |
Build Date | Tue, 11 Feb 2020 |
Security Patch Level | 2020-02-01 (February 1, 2020) |
Size | 2.7 GB |
Download | Google Drive | Android File Host |
How To Install Galaxy A20 SM-A205F U7 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A20 SM-A205F U7 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A20 SM-A205F U7 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A20 SM-A205F U7 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.
- Phone must have a 70–80% charge.