The specific Galaxy A2 Core SM-A260F U13 Firmware Download Package comes with a Stock ROM of Galaxy A2 Core SM-A260F U13 Security Patch Level 2021-07-01 (July 1, 2021). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A2 Core SM-A260F Binary 13 Android 8.1.0 Oreo South Africa XFA A260FXXSDAUG2
There are various reasons to flash “Stock Firmware on Galaxy A2 Core SM-A260F U13“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
How To Install Galaxy A2 Core SM-A260F U13 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A2 Core SM-A260F U13 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A2 Core SM-A260F U13 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy A2 Core SM-A260F U13 Firmware“.
Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of information in this guide.