SM-A135U1 Binary 1 Firmware

The specific Galaxy A13 SM-A135U1 U1 Firmware Download Package comes with a Stock ROM of Galaxy A13 SM-A135U1 U1 ADD DATE 2022-04-14. This helps you to bypass FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy A13 SM-A135U1 Binary 1 Firmware – Android 12 S – XAA – A135U1UEU1AVC7 – United States

There are various reasons to flash “Stock Firmware on Galaxy A13 SM-A135U1 U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements:

Galaxy A13 SM-A135U1 U1 Stock ROM Details:

Model SM-A135U1 Binary 1 U1, S1, Bit 1
Region / Country United States
Language Multi-Language
Android version Android 12 S
Operator / Carrier Clean (no logo or carrier apps)
AP / PDA A135U1UEU1AVC7
CSC A135U1OYM1AVC7
CP Version / Base Band Modem A135U1OYM1AVC7
product code XAA
Build Date 20220328195650
Added Date  2022-04-14 00:00:35
Size 3.28 GB Full Files
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy A13 SM-A135U1 U1 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy A13 SM-A135U1 U1 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy A13 SM-A135U1 U1 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A13 SM-A135U1 U1 Firmware.
  • Use these instructions at your own risk.
  • Phone must have a 70–80% charge.