Galaxy A13 SM-A135M U3 Firmware – Android 13 T

Galaxy A13 SM-A135M Binary 3 Firmware
If you own a Galaxy A13 SM-A135M U3 smartphone and want to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A13 SM-A135M U3 With 2023-05-01 (May 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung Galaxy A13 SM-A135M Binary 3 Android 13 Panama TPA A135MUBU3CWE5

Benefits of Updating Firmware

There are various reasons to flash “Stock Firmware on Galaxy A13 SM-A135M U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware


How To Install Galaxy A13 SM-A135M U3 Stock Firmware:

Download Galaxy A13 SM-A135M U3 Latest Firmware:

SM-A135M U3 Panama TPA A135MUBU3CWE5:

Model SM-A135M Binary 3 U3, S3, Bit 3
Region / Country Panama
Language Multi-Language
Android version Android 13 T One UI 5.1 Update
Operator / Carrier Clear TPA (no logo, carrier apps)
Modem CP Version / Baseband A135MUBU3CWE5
product code TPA
Build Date 2023-05-24
Security Patch Level 2023-05-01 (May 1, 2023)
Size 4.2 GB
[quads id=2]
Panama TPA Google Drive
Ecuador EON
Google Drive
SM-A135M U3 Argentina ARO A135MUBS3BWD2:
Model SM-A135M Binary 3 U3, S3, Bit 3
Region / Country Argentina
Language Multi-Language
Android version Android 13 T
Operator  / Carrier Clear ARO (no logo, carrier apps)
Modem CP Version / Baseband A135MUBS3BWD2
product code RIM
Build Date 2023-04-26
Security Patch Level 2023-05-01 (May 1, 2023)
Size 4.3GB
Download Google Drive

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy A13 SM-A135M U3 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy A13 SM-A135M U3 finally boots up, you should be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”


If you encounter any problems during the firmware update process, here are a few things you can try:

  1. Restart your device and retry the installation process.
  2. Ensure your device has sufficient battery.
  3. If you continue to encounter problems, you may need to perform a factory reset on your device.


Installing the latest firmware on your Galaxy A13 SM-A135M U3 can bring several improvements to your device, including bug fixes and new features. If you follow the steps outlined in this guide, you should be able to update your device to the latest firmware version successfully. If you encounter any problems during the installation process, refer to the troubleshooting section of this guide for help.

Leave a Reply

Your email address will not be published. Required fields are marked *