A136WVLU1AUK9

The specific Galaxy A13 5G SM-A136W U1 Firmware Download Package has a Stock ROM of Galaxy A13 5G SM-A136W U1 ADD DATE 2022-01-03 15. This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy A13 5G SM-A136W Binary 1 Firmware – A136WVLU1AUK9 – Android 11 R – SOL – Canada

There are various reasons to flash “Stock Firmware on Galaxy A13 5G SM-A136W U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A13 5G SM-A136W U1 Stock ROM Details:

SM-A136W U1 Firmware – A136WVLU1AUK9 – SOL – Canada:

Model SM-A136W Binary 1 U1, S1, Bit 1
Region / Country Canada
Language Multi-Language
Android version Android 11 R
Operator / Carrier Sol
PDA A136WVLU1AUK9
CSC A136WOYV1AUK9
BUILD DATE 20211123203130
product code Sol
ADD DATE 2022-01-03 15:18:09
Security Patch Level
Size 3.78 GB Full Files
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy A13 5G SM-A136W U1 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the Galaxy A13 5G SM-A136W U1 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy A13 5G SM-A136W U1 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A13 5G SM-A136W U1 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.