Home Stock Firmware Samsung Galaxy A12 SM-A127F U4 Firmware – Android 11 R

Galaxy A12 SM-A127F U4 Firmware – Android 11 R

SM-A127F Binary 4 Firmware

The specific Galaxy A12 SM-A127F U4 Firmware Download Package has a Stock ROM of Galaxy A12 SM-A127F U4 Security Patch Level 2022-02-01 (February 1, 2022). This helps bypass FRP lock and revert from the root and custom ROM.

Samsung Galaxy A12 SM-A127F Binary 4 Android 11 R Portugal MEO A127FXXS4AVB2

There are various reasons to flash “Stock Firmware on Galaxy A12 SM-A127F U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A12 SM-A127F U4 Stock ROM Details:

Model SM-A127F Binary 4 U4, S4, Bit 4
Region / Country Portugal
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean MEO (no logo, operator apps)
PDA A127FXXS4AVB2
CSC A127FOXM4AUK2
MODEM CP Version A127FXXS4AVB5
product code MEO
Build Date 2022-02-11
Security Patch Level 2022-02-01 (February 1, 2022)
Size 5 GB
[quads id=2]
Download Google Drive Mega

How To Install Galaxy A12 SM-A127F U4 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the  Galaxy A12 SM-A127F U4 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

You should run your desired firmware when your Galaxy A12 SM-A127F U4 finally boots up.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A12 SM-A127F U4 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.

Exit mobile version