SM-A115U1 Binary 6 Firmware

The specific Galaxy A11 SM-A115U1 Binary 6 Firmware Download Package comes with a Stock ROM of Galaxy A11 SM-A115U1 Binary 6 Security Patch Level 2022-02-01 (February 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy A11 SM-A115U1 Binary 6 Android 11 R United States XAA A115U1UES6BVB1

There are various reasons to flash “Stock Firmware on Galaxy A11 SM-A115U1 Binary 6“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A11 SM-A115U1 Binary 6 Stock ROM Details:

SM-A115U1 U6 United States XAA A115U1UES6BVB1:

Model SM-A115U1 Binary 6 U6, S6, Bit 6
Region / Country United States / USA
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean XAA (no logo or carrier apps)
PDA A115U1UES6BVB1
CSC A115U1OYM6BVB1
MODEM CP Version A115U1UES6BVB1
product code XAA
Build Date 2022-02-09
Security Patch Level 2022-02-01 (February 1, 2022)
Size 2.8 GB
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy A11 SM-A115U1 Binary 6 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy A11 SM-A115U1 Binary 6 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy A11 SM-A115U1 Binary 6 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A11 SM-A115U1 Binary 6 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.