The specific Galaxy A11 SM-A115M U3 Firmware Download Package comes with a Stock ROM of Galaxy A11 SM-A115M U3 Security Patch Level 2023-01-01 (January 1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A11 SM-A115M Binary 3 Android 12 S Colombia COO A115MUBS3CWA1
There are various reasons to flash “Stock Firmware on Galaxy A11 SM-A115M U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A11 SM-A115M U3
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A11 SM-A115M U3 Stock ROM Details:
SM-A115M U3 Colombia COO A115MUBS3CWA1:
Model | SM-A115M Binary 3 U3, S3, Bit 3 |
Region / Country | Colombia |
Language | Multi-Language |
Android version | Android 12 s |
Operator / Carrier | Clean COO (no logo, carrier apps) |
AP / PDA | A115MUBS3CWA1 |
CSC | A115MOWO3CVJ1 |
Modem CP Version / Baseband | A115MUBS3CWA1 |
product code | COO |
Build Date | 2023-01-25 |
Security Patch Level | 2023-01-01 (January 1, 2023) |
Size | 3.5 GB |
Colombia – COO | Mega | Google Drive |
Mexico MXO | Mega | Google Drive |
Other Firmware For SM-A115M:
How To Install Galaxy A11 SM-A115M U3 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A11 SM-A115M U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A11 SM-A115M U3 finally boots up, you should be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A11 SM-A115M U3 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
Must Read:
- 7 Tips to increase Samsung Galaxy battery life
- Remove the black bar from the Samsung keyboard
- Disable the camera geotag on Samsung phones
- Steps To Record The Samsung Galaxy Screen
- Fix Moisture Detected on Samsung
- Download USB Drivers for Samsung Mobiles
- KnoxPatch: LSPosed Module to Restore Samsung Knox Features