The specific Galaxy A11 SM-A115M U1 Firmware Download Package has a Stock ROM of Galaxy A11 SM-A115M U1 Security Patch2021-02-01 (February 1, 2021). (This helps bypass FRP lock and revert from root and custom ROM.
There are various reasons to flash “Stock Firmware on Galaxy A11 SM-A115M U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
How To Install Galaxy A11 SM-A115M U1 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A11 SM-A115M U1 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy A11 SM-A115M finally boots up, you should run your desired firmware.
If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy A11 SM-A115M U1 Firmware“.
Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.