The specific Galaxy A10e SM-S102DL U11 Firmware Download Package has a Stock ROM of Galaxy A10e SM-S102DL U11 Security Patch Level. This helps bypass FRP lock and revert from the root and custom ROM.
Advertisement
Samsung Galaxy A10e SM-S102DL Binary 11 Firmware – Android 11 R – TFN – S102DLUDSBCVA1 – United States
There are various reasons to flash “Stock Firmware on Galaxy A10e SM-S102DL U11“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
How To Install Galaxy A10e SM-S102DL U11 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A10e SM-S102DL U11 Firmwarefiles on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Galaxy A10e SM-S102DL U11 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy A10e SM-S102DL U11 Firmware“.
Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.