The specific Galaxy A10e SM-A102U U9 Firmware Download Package has a Stock ROM of Galaxy A10e SM-A102U U9 Security Patch Level 2020-12-01 (1 December 2020). This helps bypass FRP lock and revert from the root and custom ROM.
Samsung Galaxy A10e SM-A102U Binary 9 Android 9 Pie United States XAS – A102USQS9ATL1
There are various reasons to flash “Stock Firmware on Galaxy A10e SM-A102U U9“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
How To Install Galaxy A10e SM-A102U U9 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A10e SM-A102U U9 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Galaxy A10e SM-A102U U9 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy A10e SM-A102U U9 Firmware“.