The specific Galaxy A10 SM-A105M U8 Firmware Download Package comes with a Stock ROM of Galaxy A10 SM-A105M U8 Security Patch Level 2023-03-01 (March 1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A10 SM-A105M Binary 8 Android 11 R Argentina ARO A105MUBS8CWA1
There are various reasons to flash “Stock Firmware on Galaxy A10 SM-A105M U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A10 SM-A105M U8
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy A10 SM-A105M U8 Stock ROM Details:
Galaxy A10 SM-A105M U8 Uruguay Claro CTU A105MUBU8CWB1:
Model | SM-A105M Binary 8 U8, S8, Bit 8 |
Region / Country | Uruguay |
Language | Multi Language |
Android version | Android 11 R |
Operator / Carrier | course CTU |
AP / PDA | A105MUBU8CWB1 |
CSC | A105MOWA8CWB1 |
Modem CP Version / Baseband | A105MUBU8CWB1 |
product code | CTU |
Build Date | 2023-02-28 |
Security Patch Level | 2023-03-01 (March 1, 2023) |
Size | 3.4 GB |
Download | Mega | Google Drive |
Even More:
- Galaxy A10 SM-A105M U6 Firmware
- Galaxy A10 SM-A105M U7 Firmware
- Samsung Galaxy A10 SM-A105M Fix DM-Verity (DRK) [FRP: ON OEM: ON]
How To Install Galaxy A10 SM-A105M U8 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A10 SM-A105M U8 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A10 SM-A105M U8 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A10 SM-A105M U8 Firmware“.
- Use these instructions at your own risk.
- Phone must have a 70–80% charge.