Galaxy A10 SM-A105F Binary 7 Firmware

The specific Galaxy A10 SM-A105F U7 Firmware Download Package comes with a Stock ROM of Galaxy A10 SM-A105F U7 Security Patch Level 2022-01-01 (January 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy A10 SM-A105F Binary 7 Android 11 R South Africa XFE A105FDDS7CVA2

There are various reasons to flash “Stock Firmware on Galaxy A10 SM-A105F U7“. For example, your Phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your Phone and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the Phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy A10 SM-A105F U7 Stock ROM Details:

SM-A105F U7 South Africa XFE A105FDDS7CVA2:

Model SM-A105F Binary 7 U7, S7, Bit 7
Region / Country South Africa
Language Multi-Language
Android version Android 11 R
Operator / Carrier Clean XFE (no logo, carrier apps)
AP / PDA A105FDDS7CVA2
CSC A105FOJM7CVA2
CP Version / Baseband Modem A105FDDS7CVA2
product code XFE
Build Date 2022-01-12
Security Patch Level 2022-01-01 (January 1, 2022)
Size 3.2 GB
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy A10 SM-A105F U7 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy A10 SM-A105F U7 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the F Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy A10 SM-A105F U7 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A10 SM-A105F U7 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.