If you own a Galaxy A04 SM-A045M smartphone and are looking to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Galaxy A04 SM-A045M U3 With 2023-08-01 (August 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy A04 SM-A045M Binary 3 Android 13 Mexico MXO A045MUBS3CWI3
Benefits of Updating Firmware
There are various reasons to flash “Stock Firmware on Galaxy A04 SM-A045M U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Preparation:
- Supported Phone: Galaxy A04 SM-A045M U3
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy A04 SM-A045M U3 Stock Firmware:
Download Galaxy A04 SM-A045M U3 Latest Firmware:
SM-A045M U3 Mexico MXO A045MUBS3CWI3:
Model | SM-A045M Binary 3 U3, S3, Bit 3 |
Region / Country | Mexico |
Language | Multi-Language |
Android Version | Android 13 T |
Operator / Carrier | Clean MXO (without logo, operator apps) |
AP/PDA | A045MUBS3CWI3 |
CSC | A045MOWO3CWI3 |
Modem CP Version / Baseband | A045MUBS3CWI3 |
Product code | MXO |
Build / Release Date | 2023-10-02 |
Security Patch Level | 2023-08-01 (August 1, 2023) |
Size | 4.8GB |
Mexico MXO | Google Drive |
Argentina ARO | Google Drive |
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A04 SM-A045M U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A04 SM-A045M U3 finally boots up, you should run your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing."Galaxy A04 SM-A045M U3 Firmware".
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Phone must have a 70–80% charge.
Troubleshooting
If you encounter any problems during the firmware update process, here are a few things you can try:
- Restart your device and retry the installation process.
- Ensure your device has sufficient battery.
- If you continue to encounter problems, you may need to perform a factory reset on your device.
Conclusion
Installing the latest firmware on your Galaxy A04 SM-A045M U3 can bring several improvements to your device, including bug fixes and new features. By following the steps in this guide, you can update your device to the latest firmware successfully.
Must Read:
- 7 Tips to increase Samsung Galaxy battery life
- Remove the black bar from the Samsung keyboard
- Disable the camera geotag on Samsung phones
- Steps To Record The Samsung Galaxy Screen
- Fix Moisture Detected on Samsung
- Download USB Drivers for Samsung Mobiles
- KnoxPatch: LSPosed Module to Restore Samsung Knox Features