Galaxy A03s SM-A037U U3 Firmware – Android 13 T
The specific Galaxy A03s SM-A037U U3 Firmware Download Package comes with a Stock ROM of Galaxy A03s SM-A037U U3 Security Patch Level 2023-04-01 (April 1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A03s SM-A037U Binary 3 Android 13 United States USA TMK A037USQU3DWD1
There are various reasons to flash “Stock Firmware on Galaxy A03s SM-A037U U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A03s SM-A037U U3
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A03s SM-A037U U3 Stock ROM Details:
SM-A037U U3 United States USA TMK A037USQU3DWD1:
Model | SM-A037U Binary 3 U3, S3, Bit 3 |
Region / Country | United States |
Language | Multi-Language |
Android version | Android 13 T |
Operator / Carrier | Clear TMK (no logo, carrier apps) |
AP / PDA | A037USQU3DWD1 |
CSC | A037UOYN3DWD1 |
Modem CP Version / Baseband | A037USQU3DWD1 |
product code | TMK |
Build Date | 2023-04-06 |
Security Patch Level | 2023-04-01 (April 1, 2023) |
Size | 4.5GB |
Download | Google Drive |
How To Install Galaxy A03s SM-A037U U3 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A03s SM-A037U U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed you can see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A03s SM-A037U U3 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Must Read:
- 7 Tips to Increase Samsung Galaxy battery life
- Remove the black bar from the Samsung keyboard
- Disable the camera geotag on Samsung phones
- Steps To Record The Samsung Galaxy Screen
- Fix Moisture Detected on Samsung
- Download USB Drivers for Samsung Mobiles
- KnoxPatch: LSPosed Module to Restore Samsung Knox Features