The specific Galaxy A03 SM-A035G U2 Firmware Download Package comes with a Stock ROM of Galaxy A03 SM-A035G U2 Security Patch Level 2023-01-01 (January 1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A03 SM-A035G Binary 2 Android 13 T Portugal MEO A035GXXU2CWA9
There are various reasons to flash “Stock Firmware on Galaxy A03 SM-A035G U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A03 SM-A035G U2
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install Samsung USB Driver
- Download Odin’s Latest version
Galaxy A03 SM-A035G U2 Stock ROM Details:
SM-A035G U2 Portugal MEO A035GXXU2CWA9:
Model | SM-A035G Binary 2 U2, S2, Bit 2 |
Region / Country | Portugal |
Language | Multi-Language |
Android version | Android 13 T |
Operator / Carrier | Clean MEO (no logo, carrier apps) |
AP / PDA | A035GXXU2CWA9 |
CSC | A035GOXM2CWA9 |
Modem CP Version / Baseband | A035GXXU2CWA9 |
product code | MEO |
Build Date | 2023-01-31 |
Security Patch Level | 2023-01-01 (January 1, 2023) |
Size | 4.5GB |
Download | Mega | Google Drive |
Other Firmware For SM-A035G:
How To Install Galaxy A03 SM-A035G U2 Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.
2: Download and extract the Galaxy A03 SM-A035G U2 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A03 SM-A035G U2 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A03 SM-A035G U2 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Ensure charged you phone at 70–80%.