Galaxy A03 SM-A035F Binary 2 Firmware – Android 13 T

SM-A035F Binary 2 Firmware - Android 12 S

The specific Galaxy A03 SM-A035F U2 Firmware Download Package comes with a Stock ROM of Galaxy A03 SM-A035F U2 Security Patch Level 2023-01-01 (January 1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.


Samsung Galaxy A03 SM-A035F Binary 2 Android 13T South Africa XFE A035FXXU2CWA8

There are various reasons to flash “Stock Firmware on Galaxy A03 SM-A035F U2“. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Galaxy A03 SM-A035F U2 Stock ROM:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.


Galaxy A03 SM-A035F U2 Stock ROM Details:

SM-A035F U2 South Africa XFE A035FXXU2CWA8:

Model SM-A035F Binary 2 U2, S2, Bit 2
Region / Country South Africa
Language Multi-Language
Android version Android 13 T
Operator / Carrier Clear XFE (no logo, carrier apps)
Modem CP Version / Baseband A035FXXU2CWA8
product code XFE
Build Date 2023-01-30
Security Patch Level 2023-01-01 (January 1, 2023)
Size 4.3GB
[quads id=2]
Download Mega Google Drive

SM-A035F U2 South Africa XFA A035FXXU2BVI8:

Model SM-A035F Binary 2 U2, S2, Bit 2
Region  / Country South Africa
Language Multi-Language
Android version Android 12 s
Operator / Carrier Clean XFA (no logo, carrier apps)
CP Version / Baseband Modem A035FXXU2BVI8
product code XFA
Build Date 2022-09-29
Security Patch Level 2022-09-01 (September 1, 2022)
Size 4.3 GB
Download Google Drive Mega

How To Install Galaxy A03 SM-A035F U2 Stock Firmware:

Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the  Galaxy A03 SM-A035F U2 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.

8: Once Odin detects your device, click on the PDA button, and select the Firmware.tar file.

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy A03 SM-A035F U2 finally boots up, you should be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”


  • Please read and understand the Full Guide before flashing “Galaxy A03 SM-A035F U2 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Must Read:


Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button