The specific Galaxy A02 SM-A022M U3 Firmware Download Package has a Stock ROM of Galaxy A02 SM-A022M U3 Security Patch Level 2023-06-01 (June 1, 2023). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A02 SM-A022M Binary 3 Android 11 R Argentina ARO A022MUBS3BWF1
There are various reasons to flash “Stock Firmware on Galaxy A02 SM-A022M U3“. For example, your Phone will be stuck or hang on the logo. You want to remove the FRP lock from it.
Suppose you’re going to reset your Phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Remove FRP After hard reset
- Unroot or Fix Bugs on the Phone
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy A02 SM-A022M U3
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A02 SM-A022M U3 Stock ROM Details:
SM-A022M U3 Argentina ARO A022MUBS3BWF1:
Model | SM-A022M Binary 3 U3, S3, Bit 3 |
Region / Country | Argentina |
Language | Multi-Language |
Android version | Android 11 R |
Operator / Carrier | Clear ARO (no logo, carrier apps) |
AP / PDA | A022MUBS3BWF1 |
CSC | A022MOWO3BVG7 |
Modem CP Version / Baseband | A022MXXS3BVG6 |
product code | RING |
Build Date | 2023-06-01 |
Security Patch Level | 2023-06-01 (June 1, 2023) |
Size | 2.9 GB |
Download | Mega | Google Drive |
How To Install Galaxy A02 SM-A022M U3 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A02 SM-A022M U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode. To boot into download mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message at the lower-left panel.
8: Once Odin detects your Device, click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. It’s Your Devices. Take some time to reboot, but don’t be alarmed.
You should run your desired firmware when your Galaxy A02 SM-A022M U3 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A02 SM-A022M U3 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your Device resulting from using the information in this guide.
- Phone must have a 70–80% charge.