Galaxy A01 SM-S111 Binary 4 Firmware

The specific Galaxy A01 SM-S111 U4 Firmware Download Package has a Stock ROM of Galaxy A01 SM-S111 U4. This helps you to bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy A01 SM-S111 U4 S111DLUDU 4 AUA1_S111DLTFN4AUA1_TFA_10.0

There are various reasons to flash “Stock Firmware on Galaxy A01 SM-S111 U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Prerequisites:

Galaxy A01 SM-S111 U4 Stock ROM Details:

SM-S111 U4 S111DLUDU 4 AUA1_S111DLTFN4AUA1_TFA:

Model: SM-S111 Binary 1, U1, S1, Bit 1
Language: Multi-Language
Android version: Android 10
Operator / Carrier: Clean (without logo, operator apps)
PDA: S111DLUDU4AUA1
CSC: S111DLTFN4AUA1
Size: 1.5 GB
[quads id=2]
One Drive Google Drive AFH

How To Install Galaxy A01 SM-S111 U4 Full Firmware:

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the Galaxy A01 SM-S111 U4 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy A01 SM-S111 U4 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A01 SM-S111 U4 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.