Galaxy A01 SM-A015M U4 Firmware – Android 12 S
The specific Galaxy A01 SM-A015M U4 Firmware Download Package has a Stock ROM of Galaxy A01 SM-A015M U4 Security Patch Level 2022-12-01 (December 1, 2022). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A01 SM-A015M Binary 4 Android 12S Mexico MXO A015MUBU4CWA2
There are various reasons to flash “Stock Firmware on Galaxy A01 SM-A015M U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Prerequisites:
- Supported Phone: Galaxy A01 SM-A015M U4
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A01 SM-A015M U4 Stock ROM Details:
SM-A015M U4 Mexico Argentina A015MUBU4CWA2:
Model | SM-A015M Binary 4 U4, S4, Bit 4 |
Region/ Country | Mexico |
Language | Multi-Language |
Android version | Android 12 S |
Operator / Carrier | Cleans MXO (no logo, carrier apps) |
AP / PDA | A015MUBU4CWA2 |
CSC | A015MOWO4CWA2 |
Modem CP Version / Baseband | A015MUBU4CWA2 |
product code | MXO |
Build Date | 2023-01-12 |
Security Patch Level | 2022-12-01 (December 1, 2022) |
Size | 3.4GB |
Mexico MXO | Mega | Google Drive |
Argentina ARO | Mega | Google Drive |
Download Galaxy A01 SM-A015M U4 Boot. img
boot.img A01 SM-A015M A015MUBU4AUA5 to root on Magisk without TWRP
Download | Google Drive |
How To Install Galaxy A01 SM-A015M U4 Stock Firmware:
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy A01 SM-A015M U4 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Galaxy A01 SM-A015M U4 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A01 SM-A015M U4 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Ensure charged you phone at 70–80%.
Must Read:
- 7 Tips to increase Samsung Galaxy battery life
- Remove the black bar from the Samsung keyboard
- Disable the camera geotag on Samsung phones
- Steps To Record The Samsung Galaxy Screen
- Fix Moisture Detected on Samsung
- Download USB Drivers for Samsung Mobiles
- KnoxPatch: LSPosed Module to Restore Samsung Knox Features