The specific Galaxy A01 SM-A015F U3 Firmware Download Package comes with a Stock ROM of Galaxy A01 SM-A015F U3 Security Patch Level 2020-11-01 (1 November 2020). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A01 SM-A015F Binary 3 Android 10 Q South Africa XFE – A015FXXS3ATL1
There are various reasons to flash “Stock Firmware on Galaxy A01 SM-A015F U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
How To Install Galaxy A01 SM-A015F U3 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A01 SM-A015F U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button, and choose the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once the Firmware process is completed you will be able to see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A01 SM-A015F U3 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
Read and understand the Full Guide before flashing.”Galaxy A01 SM-A015F U3 Firmware“.