|

Galaxy A01 SM-A015AZ U8 Firmware – Android 12 S

SM-A015AZ Binary 8 Firmware - Android 12 S

The specific Galaxy A01 SM-A015AZ U8 Firmware Download Package comes with a Stock ROM of Galaxy A01 SM-A015AZ U8 recent Security Patch Level ADD DATE 2022-12-23. This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy A01 SM-A015AZ Binary 8 Firmware Android 12 S AIO – United States A015AZUCU8CVK8

There are various reasons to flash “Stock Firmware on Galaxy A01 SM-A015AZ U8“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements:

Galaxy A01 SM-A015AZ U8 Stock ROM Details:

SM-A015AZ U8 AIO – United States A015AZUCU8CVK8:

Model SM-A015AZ Binary 8 U8, S8, Bit 8
Region / Country United States
Language Multi-Language
Android version Android 11 R
Operator / Carrier Tim AIO
AP / PDA A015AZUCU8CVK8
CSC A015AZAIO8CVK8
Modem CP Version / Baseband
product code AIO
Build Date 20221123152411
ADD DATE 2022-12-23
Size 3 GB Full Files
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy A01 SM-A015AZ U8 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the  Galaxy A01 SM-A015AZ U8 Firmware  files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

Once the Firmware process is completed you can see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy A01 SM-A015AZ U8 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy A01 SM-A015AZ U8 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.

Leave a Reply

Your email address will not be published. Required fields are marked *