The specific Galaxy A01 Core SM-A013M/DS U3 Firmware Download Package comes with a Stock ROM of Galaxy A01 Core SM-A013M/DS U3 Security Patch Level 2023-02-01 (February 1, 2023). This helps you to bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy A01 Core SM-A013M/DS Binary 3 Android 10 Brazil ZTO A013MUBS3AWC1
There are various reasons to flash “Stock Firmware on Galaxy A01 Core SM-A013M/DS U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Return to stock for warranty coverage.
Pre-requirements:
- Supported Phone: Galaxy A01 Core SM-A013M/DS U3
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy A01 Core SM-A013M/DS U3 Stock ROM Details:
SM-A013M/DS U3 Brazil ZTO A013MUBS3AWC1:
| Model | SM-A013M/DS Binary 3 U3, S3, Bit 3 |
| Region / Country | Brazil |
| Language | Multi-Language |
| Android version | Android 10 Q |
| Operator / Carrier | Clean ZTO (no logo, carrier apps) |
| AP / PDA | A013MUBS3AWC1 |
| CSC | A013MOWO3AVE1 |
| Modem CP Version / Baseband | A013MUBS3AWB1 |
| product code | ZTO |
| Model References | SM-A013MZRKZTO, SM-A013MZKKZTO, SM-A013MZBKZTO, SM-A013MZBSZTO |
| Build Date | 2023-03-09 |
| Security Patch Level | 2023-02-01 (February 1, 2023) |
| Size | 1.3 GB |
| Download | Mega | Google Drive |
How To Install Galaxy A01 Core SM-A013M/DS U3 Stock Firmware:
1: Download and Install the Samsung USB Driver on your computer.
2: Download and extract the Galaxy A01 Core SM-A013M/DS U3 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message on the lower-left panel.
8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your Galaxy A01 Core SM-A013M/DS U3 finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy A01 Core SM-A013M/DS U3 Firmware“.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from using the information in this guide.
- Phone must have a 70–80% charge.