Download G-Tide E68 Firmware from right here. flash it in your device and enjoy the native Android expertise once more. The download file contains the USB driver, flash tool, and the scatter file.
This article contains the G-Tide E68 Firmware Flash File. That will allow you to recover your G-Tide E68 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.
G-Tide E68 Firmware Flash File [Stock ROM]:
We will use Sp Flash Tool to unbrick the G-Tide E68 as we use for G-Tide c3. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your G-Tide E68.
The Advantages G-Tide E68 Firmware:
- Flash Stock To Unbrick your G-Tide E68
- Fix boot loop issue
- Update and Downgrade G-Tide E68
- Unroot or Fix Bugs
- To solve the lag or stutter on G-Tide E68
- Fix software issues.
- Return to stock for warranty coverage.
G-Tide E68 Firmware Details:
- Gapps File: Included
- Device Supported: G-Tide E68
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6572
- Os: Android 4.2.2
Download
Pre-requirements to Install G-Tide E68 Firmware:
- Supported Phone: G-Tide E68
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
Take Phone Backup:
G-Tide E68 Flashing Tool And Drivers:
- G-Tide E68 Flash Tool: Download the latest SP Flash tool and extract it (Install)
- G-Tide E68 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
- Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)
Disclaimer:
- Please read and understand the Full Guide Before Flashing G-Tide E68 Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Instructions to Install G-Tide E68 Firmware:
Step 1: Extract And Run SP flash tool.
Step 2: Install MTK android USB drivers.
Step 3: Then download G-Tide E68 Firmware.
Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
Step 5: Now open SP flash tool.exe.
Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.
Step 7: In the download tab, click on the scatter load button.
Step 8: After locating the scatter tab, click on the download button.
Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
Step 10: When flashing is completed, a green ring will appear in SP flash tool.
Step 11: Close the SP flash tool on your computer and unplug the phone.
Step 12: Power on the phone and enjoy it.
Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
Follow Detailed Instruction G-Tide E68 Firmware Flashing With Sp Flash Tool.