Galaxy Z Flip 3 5G SM-F711B U1 Firmware – [Full Repair]

Galaxy Z Flip 3 5G SM-F711B Binary 1 Firmware

The specific Galaxy Z Flip 3 5G SM-F711B U1 Firmware Download Package has a Stock ROM of Galaxy Z Flip 3 5G SM-F711B U1. This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy Z Flip 3 5G SM-F711B Binary 1 Full Firmware – F711BXXU1AUG7 – XME – Android 11 R

There are various reasons to flash “Stock Firmware on Galaxy Z Flip 3 5G SM-F711B U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements:

Galaxy Z Flip 3 5G SM-F711B U1 Stock ROM Details:

SM-F711B U1 Full Firmware – F711BXXU1AUG7 – XME:

Model SM-F711B U1, Bit 1, Binary 1
PDA F711BXXU1AUG7
CSC F711BOXM1AUG7
Operator / Carrier Clean ZTO (no logo, carrier apps)
Product code XME
Android version Android 11 R
Size 4 GB
[quads id=2]
Download Google Drive OneDrive

How To Install Galaxy Z Flip 3 5G SM-F711B U1 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy Z Flip 3 5G SM-F711B U1 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you can see a Green Box with Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy Z Flip 3 5G SM-F711B U1 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Z Flip 3 5G SM-F711B U1 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.