FRP Lock On Lava V7

In this particular post, I will show you how to bypass the Lava V7 FRP Security lock without flashing the Stock Firmware or box. This will also help you to remove google account from Lava V7.

Advertisement

How To Bypass FRP Lock On Lava V7 (Remove Google Account)

If you perform a Factory Data Reset on Lava V7, all settings come back to the factory default settings.

Almost all files are removed, such as documents and downloaded applications. For those who have a Google Account set up on Lava, V7 FRP is active.

This means that after the reset, you’ll be required to sign in to the Google Account using the login name and security password.

For those who have many different Google Accounts set up on the Lava V7, can sign in using any of the accounts.

The Benefit Of Frp Remove File:

  • No need to flash Stock Firmware
  • No Imie Unknown Risk
  • No dead boot risk

Requirements to Bypass Lava V7 Frp:

  • Supported Phone: Lava V7
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Lava V7 Firmware Backup

Before going to install “ Lava V7 Frp File” you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware

Download Lava V7 Flash Tool And Drivers:

A.  Download and install Lava V7 USB Drivers. The basic communication between your device and PC.

These drivers are mainly for the devices powered by SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the SPD Upgrade Tool I believe this tool is very efficient. Follow the step by step procedure to use One Click Frp Tool and remove google account from your Lava V7.

Instructions to Bypass FRP On Lava V7 With Frp File:

1: Download and Install Spreadtrum Drivers from the above-given link.

2: Now Download and setup Install the SPD Download Tool.

3: Open the Research download tool > bin folder.

4: Launch Research Download.exe.

5: Click on the Load Packet icon (top left corner).

6: In the window that pops up, navigate to the location of the Lava V7 Frp File, select it then click Open.

7: The Lava V7 Frp bypass file should now be loaded (its name should appear at the top).

8: Click the Settings Icon (top left corner).

9: In the box that pops up, untick any item(s) you do not wish to flash then click OK.

10: Next Click the Start downloading button.

11: You should see Waiting under the Progress bar.

12: Switch off the Lava V7 phone (still with battery inside) then connect it to the PC

(note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

13: Once the FRP bypass is complete, you’ll see Passed.

14: Click on the Stop downloading icon then disconnect the phone from PC and boot.

Done! Now you just have to do a factory reset through the recovery of your Lava V7. You will no longer be asked to enter a Google account to unlock your smartphone and you will have completely removed the Lava V7 FRP block.

[quads id=2]

Lava V7 Frp Bypass File Details:

  • Device Supported: Lava V7
  • Tool Supported: SPD Flash Tool
  • Processor: SPD
  • OS: Android

Download: