How To Flash ZTE V965 Firmware File [ROM]

Download ZTE V965 Firmware from right here. flash it in your device and enjoy the native Android expertise once more. The download file contains the USB driver, flash tool, and the ZTE V965 scatter file.

ZTE V965 Firmware

This article contains the ZTE V965 Firmware Flash File. That will allow you to recover your ZTE V965 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. Besides these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

There are different reasons why we will use Sp Flash Tool to unbrick the ZTE V965. I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your ZTE V965.

The Advantages Of  ZTE V965 Stock Firmware:

  • Flash Stock To Unbrick your ZTE V965
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade ZTE V965
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on ZTE V965
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

ZTE V965 Of Stock ROM Details:

  • Gapps File: Included
  • Device Supported: ZTE V965
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6589
  • Os: Android

Download

ZTE_V965_MT6589_V1.0.0_B03_15102013.zip

Pre-requirements to Install ZTE V965 Firmware:

  • Supported Phone: ZTE V965
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take ZTE V965 Backup:

Download ZTE V965 Flashing Tool And Drivers:

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing ZTE V965 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM ZTE V965 must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install ZTE V965 Firmware:

1. Download ZTE V965 Firmware zip file given above and extract it in your computer.

2. Download ZTE V965 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your ZTE V965 smartphone and take away the battery (it’s removable).

Switch Off ZTE V965

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

Start SPFT For ZTE V965 Firmware Flash

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

ZTE V965 Firmware Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

Select ZTE V965 Firmware

8. Now click on on the “Download” button to start out the flashing process.

Press Download For ZTE V965 Firmware

9. Next, join your ZTE V965 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

ZTE V965 Firmware Download Complete

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your ZTE V965 Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction ZTE V965 Firmware Flashing With Sp Flash Tool.

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close