How To Flash Uniscope US910T Firmware File

This specific Firmware Download Package For Uniscope US910T comes with a Stock ROM of Uniscope US910T. USB drivers, Flash tool for Installing the firmware and a brief guide.

To help you in installing the Uniscope US910T Stock Firmware.

Uniscope US910T Firmware is a set of programs and software installed on the ROM.

It also is known as Uniscope US910T Flash File and Uniscope US910T Stock ROM.

That firmware update is only for Uniscope US910T.

Don’t try to install that firmware on other models of MTK Android devices that can destroy your phone.

Uniscope Firmware File

We are going to Flash Stock ROM on Uniscope US910T. In this guide, we have used the SP Flash Tool to flash the Uniscope US910T Firmware. And we include the Official link to Download Uniscope US910T Stock ROM and all Needed Files.

Your device may get bricked And flashing stock ROM is the only way to go out. To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a Comment.

We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Uniscope US910T.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Uniscope US910T.

The Advantages Of Uniscope US910T Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Uniscope US910T is stuck in a boot loop, and as the name implies, is caused by a software error on Uniscope US910T, usually the lack of a system to boot from or some other minor software bug that glitching boot. They are easily fixable by flashing the stock ROM on Uniscope US910T through recovery or with SP Flash Tool. If your Uniscope US910T device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Uniscope Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Uniscope US910T Stock ROM Details:

Gapps File Included
Device Supported Uniscope US910T
Tool Supported SP Flash Tool
Processor MediaTek MT6575
Os Android
Download Uniscope US910T_MT6575_20150309.rar   Password

Pre-requirements to Install Uniscope US910T Firmware:

  • Supported Phone: Uniscope US910T
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Uniscope US910T Backup:

Download Uniscope US910T Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Uniscope US910T Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM Uniscope US910T must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Uniscope US910T Firmware:

1. Download Uniscope US910T Firmware zip file given above and extract it in your computer.

2. Download Uniscope US910T USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Uniscope US910T smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Uniscope US910T Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed Uniscope US910T stock ROM on your  Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction Uniscope US910T Firmware Flashing With Sp Flash Tool.

Check Also

Uniscope Firmware File

How To Flash Uniscope U966 Firmware File

If your Uniscope U966 device is corrupt or bricked. Download Uniscope U966 Firmware from here. …

Leave a Reply

Your email address will not be published. Required fields are marked *