How To Flash Uniscope US900 Firmware File

This specific Firmware Download Package For Uniscope US900 comes with a Stock ROM of Uniscope US900. USB drivers, Flash tool for Installing the firmware and a brief guide.

To help you in installing the Uniscope US900 Stock Firmware.

Uniscope US900 Firmware is a set of programs and software installed on the ROM.

It also is known as Uniscope US900 Flash File and Uniscope US900 Stock ROM.

That firmware update is only for Uniscope US900.

Don’t try to install that firmware on other models of MTK Android devices that can destroy your phone.

Uniscope Firmware File

We are going to Flash Stock ROM on Uniscope US900. In this guide, we have used the SP Flash Tool to flash the Uniscope US900 Firmware. And we include the Official link to Download Uniscope US900 Stock ROM and all Needed Files.

Your device may get bricked And flashing stock ROM is the only way to go out. To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a Comment.

We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Uniscope US900.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Uniscope US900.

The Advantages Of Uniscope US900 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Uniscope US900 is stuck in a boot loop, and as the name implies, is caused by a software error on Uniscope US900, usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the stock ROM on Uniscope US900 through recovery or with SP Flash Tool. If your Uniscope US900 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Uniscope Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Uniscope US900 Stock ROM Details:

Gapps File Included
Device Supported Uniscope US900
Tool Supported SP Flash Tool
Processor MediaTek MT6577
Os Android
Download Uniscope US900_20150309_UA.rar   Password

Pre-requirements to Install Uniscope US900 Firmware:

  • Supported Phone: Uniscope US900
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Uniscope US900 Backup:

Download Uniscope US900 Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Uniscope US900 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM Uniscope US900 must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Uniscope US900 Firmware:

1. Download Uniscope US900 Firmware zip file given above and extract it in your computer.

2. Download Uniscope US900 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Uniscope US900 smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Uniscope US900 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed Uniscope US900 stock ROM on your  Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction Uniscope US900 Firmware Flashing With Sp Flash Tool.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for