How To Flash S-TELL M471 Firmware File

if you are facing S-TELL M471 firmware issue. Then you can fix issues like that at home without any help of a software technician. in fact not all of the issues that are the hardware fault.

Today we will discuss how to sort out S-TELL M471 Stock Rom issue. There are several methods to Flash S-TELL M471 Firmware. Of course, there are also some custom mods and ROMs that you can try.

However, if you do not like the custom ROMs you have installed and want to go back to the original operating system, we have the guide for you.

If you are looking for this guide, we will now see how you can flash the stock firmware on S-TELL M471.

S TELL M471 Firmware

We are going to Flash Stock ROM on S-TELL M471. In this guide, we have used the SP Flash Tool to flash the S-TELL M471 Firmware.

And we include the Official link to Download S-TELL M471 Stock ROM and all Needed Files. your device may get bricked And flashing stock ROM is the only way to go out.

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a Comment.

We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the S-TELL M471. I believe this tool is very efficient.

Follow the step by step procedure to use One Click Unbrick Tool and unbrick your S-TELL M471.

The Advantages Of S-TELL M471 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re S-TELL M471 is stuck in a boot loop, and as the name implies, is caused by a software error on S-TELL M471.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the stock ROM on S-TELL M471 through recovery or with SP Flash Tool.

If your S-TELL M471 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

S-TELL M471 Stock ROM Details:

Gapps File Included
Device Supported S-TELL M471
Tool Supported SP Flash Tool
Processor MediaTek MT6582 1300 MHz, 4 cores
Os Android 4.4.2
Download  S-TELL M471 MT6582 4.4.2

Pre-requirements to Install S-TELL M471 Firmware:

  • Supported Phone: S-TELL M471
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take S-TELL M471 Backup:

Download S-TELL M471 Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing S-TELL M471 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM S-TELL M471 must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Other S-Tell Firmware:

S-TELL C551    S-Tell M578 MT6580    S-Tell X550 MT6735M Android 4.4.2    S-TELL P771 Firmware    Flash S-Tell M300 Firmware    S-Tell M450

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install S-TELL M471 Firmware:

1. Download S-TELL M471 Firmware zip file given above and extract it in your computer.

2. Download S-TELL M471 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your S-TELL M471 smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your S-TELL M471 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed S-TELL M471 stock ROM on your  Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction S-TELL M471 Firmware Flashing With Sp Flash Tool.

Search Tags:

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for