The specific Gomobile Go Onyx Digicel Firmware comes with a Stock ROM of Gomobile Go Onyx Digicel. This helps you to bypass FRP lock and revert from the root and custom ROM.
How To Flash Gomobile Go Onyx Digicel Stock ROM:
There are various reasons to flash (Firmware on Gomobile Go Onyx Digicel).
For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.
Requirements To Flash Gomobile Go Onyx Digicel Stock ROM:
- Charge your mobile: Your phone may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- 1. Take Gomobile Go Onyx Digicel Full Backup
Before going to install Gomobile Go Onyx Digicel stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.
Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
- 2. Download Gomobile Go Onyx Digicel Flash Tool And Drivers:
- A. Download and install Gomobile Go Onyx Digicel Drivers. The necessary communication between your device and PC.
These drivers are mainly for the devices powered by the SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
- B. We use the Spreadtrum flash tool for as Gomobile Go Onyx Digicel Flash Tool because of this tool is very efficient and support all kind of SPD phones.
Instructions to Flash Gomobile Go Onyx Digicel Stock ROM:
1: Download and install SPreadtrum USB Driver on your computer.
2: Download the Gomobile Go Onyx Digicel flash file.
3: Extract Spreadtrum Upgrade Tool on your computer.
4: Now open Spreadtrum Upgrade Tool .exe.
5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).
6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the Gomobile Go Onyx Digicel ROM file. (having .pac extension)
7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.
8: Wait for 2 – 10 minutes, as the device is in the flashing process.
9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.
10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.
- Congratulations, You have successfully installed Gomobile Go Onyx Digicel Stock ROM using the SPD Flash tool.
Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.
Bin Packet load Error When Flashing “Gomobile Go Onyx Digicel Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.
How to Write IMEI After Flashing Gomobile Go Onyx Digicel Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.
Gomobile Go Onyx Digicel Firmware Details:
|Gapps: Included||No Root|
|Device Supported: Gomobile Go Onyx Digicel||No Twrp And Nand Backup|
|Tool Supported: SPD Flash Tool||No Customization And Over cloaking|
|Soc: SC7731||No ADB Ad Block|
|Os: Android 7 Nougat||Pre-installed OEM apps|