How To Flash Ginzzu GT-X853 Firmware File

There are several methods to Flash Ginzzu GT-X853 Firmware. Of course, there are also some custom mods and ROMs that you can try. However, if you do not like the custom ROMs you have installed and want to go back to the original operating system, we have the guide for you. If you are looking for this guide, we will now see how you can flash the stock firmware on Ginzzu GT-X853.

Ginzzu GT X853 Firmware

We are going to Flash Stock ROM on Ginzzu GT-X853. In this guide, we have used the SP Flash Tool to flash the Ginzzu GT-X853 Firmware. And we include the Official link to Download Ginzzu GT-X853 Stock ROM and all Needed Files. your device may get bricked And flashing stock ROM is the only way to go out. To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a Comment.

We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Ginzzu GT-X853. I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Ginzzu GT-X853.

The Advantages Of Ginzzu GT-X853 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Ginzzu GT-X853 is stuck in a boot loop, and as the name implies, is caused by a software error on Ginzzu GT-X853, usually the lack of a system to boot from or some other minor software bug that glitching boot. They are easily fixable by flashing the stock ROM on Ginzzu GT-X853 through recovery or with SP Flash Tool. If your Ginzzu GT-X853 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • GT-X853 Boots Straight Into Recovery;
  • Ginzzu Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Ginzzu GT-X853 Stock ROM Details:

Gapps File Included
Device Supported Ginzzu GT-X853
Tool Supported SP Flash Tool
Processor MediaTek MT8382 1300 MHz processor
Os Android 4.4
Download GT-X853




Pre-requirements to Install Ginzzu GT-X853 Firmware:

  • Supported Phone: Ginzzu GT-X853
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Ginzzu GT-X853 Backup:

Download Ginzzu GT-X853 Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Ginzzu GT-X853 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM Ginzzu GT-X853 must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Other Ginzzu Firmware Flash Files:

Ginzzu GT-7050    Ginzzu GT-7205    Ginzzu GT-X890    Ginzzu GT-1045

Ginzzu RS93D    Ginzzu RS8501    Ginzzu S5001    Ginzzu S5030

Ginzzu S5220    Ginzzu GT-1040    Ginzzu GT-1020

Ginzzu S5040    Ginzzu S5110    Ginzzu S5120

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Ginzzu GT-X853 Firmware:

1. Download Ginzzu GT-X853 Firmware zip file given above and extract it in your computer.

2. Download Ginzzu GT-X853 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Ginzzu GT-X853 smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Ginzzu GT-X853 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed Ginzzu GT-X853 stock ROM on your  Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction Ginzzu GT-X853 Firmware Flashing With Sp Flash Tool.

Check Also

Ginzzu S5040 Firmware

How To Flash Ginzzu S5040 Firmware File

There are several methods to Flash Ginzzu S5040 Firmware. Of course, there are also some …

Leave a Reply

Your email address will not be published. Required fields are marked *