How To Flash GFIVE G10 Mini Firmware [MT6572]

GFIVE G10 Mini Firmware

At some point, while using GFIVE G10 Mini, you’ll probably encounter a situation in which you need to flash GFIVE G10 Mini firmware.

You might need a GFIVE G10 Mini stock ROM how do you make sure the flashing process goes off without a hitch?

That’s what we’re going to tell you in this post! To do it, we’ll use a free flashing tool called Sp Flash Tool. This tool will enable you to flash stock ROM of your GFIVE G10 Mini and set up on a new Firmware.

We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the GFIVE G10 Mini.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your GFIVE G10 Mini.

The Advantages Of GFIVE G10 Mini Stock ROM:

You Can Use The Following Flash Files For Upgrade or Unbrick GFIVE G10 Mini / And If You Want To Hard Reset It By Flashing The Stock ROM/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot Loop Problem.

This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The GFIVE G10 Mini Stock Firmware IMEI Null or Unknown Baseband Problems Can Be Solved.

GFIVE G10 Mini Stock ROM Details:

Gapps File Included
Device Supported GFIVE G10 Mini
Tool Supported SP Flash Tool
Processor MediaTek MT6572
Os Android 4.4.2
Download

Pre-requirements to Install GFIVE G10 Mini Firmware:

  • Supported Phone: GFIVE G10 Mini
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take GFIVE G10 Mini Backup:

Download GFIVE G10 Mini Flashing Tool And Drivers:

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing GFIVE G10 Mini Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM GFIVE G10 Mini must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install GFIVE G10 Mini Firmware:

1. Download GFIVE G10 Mini Firmware zip file given above and extract it in your computer.

2. Download GFIVE G10 Mini USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your GFIVE G10 Mini smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your GFIVE G10 Mini Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed GFIVE G10 Mini stock ROM on your  Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction GFIVE G10 Mini Firmware Flashing With Sp Flash Tool.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close