Vivo Y11s PD2042F Firmware Flash File – Android 10 Q

Vivo Y11s PD2042F Firmware

Welcome To all in one thread for Vivo Y11s PD2042F in this post I will share all kinds of Vivo Y11s PD2042F Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Vivo Y11s PD2042F software upgrade.

Download Firmware/Flash File For Vivo Y11s PD2042F:

“Vivo Y11s PD2042F Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Vivo Y11s PD2042F Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per their desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Vivo Y11s PD2042F Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Pre-requirements:

  • Supported Phone: Vivo Y11s PD2042F
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Take Vivo Y11s PD2042F Full Backup

Before going to install Vivo Y11s PD2042F stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download Vivo Y11s PD2042F Flash Tool And Drivers:
  • A.  Download and install Vivo Y11s PD2042F Drivers. The necessary communication between your device and PC.
  • These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
  • B. We use the QFIL QPST Flash Tool as Vivo Y11s PD2042F Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.
Device Name:Vivo Y11s PD2042F
Type:Full ROM+ OTA’s
ROM Size:up to 3-8GB
SoC:QCOM SD460
Os:Android 10
Password: Null
Gapps:Included
Root access:Not
Firmware Version:
PD2042F_EX_A_3.7.2_vivo_qcom_LA.UM.8.15.r1-02500-KAMORTA_split

[the_ad id=’190809′]

DownloadPD2042F_EX_A_3.7.2 QPST
 PD2042F_EX_A_3.7.2 Full OTA

Instructions to Flash Vivo Y11s PD2042F Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY, and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the Vivo Y11s PD2042F ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed Stock ROM using the QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide before flashing “Vivo Y11s PD2042F Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.