Vivo Y11 2019 PD1930F Firmware Flash File [Stock ROM]


Vivo Y11 2019 PD1930F Firmware

Welcome To all in one thread for Vivo Y11 2019 PD1930F in this post I will share all kinds of Vivo Y11 2019 PD1930F Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Vivo Y11 2019 PD1930F software upgrade.

Why would you want to flash Firmware on your Vivo Y11 2019 PD1930F?

“Vivo Y11 2019 PD1930F Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Vivo Y11 2019 PD1930F Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Vivo Y11 2019 PD1930F Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Vivo Y11 2019 PD1930F Firmware Details:

  • Gapps: Included
  • Device Supported: Vivo Y11 2019 PD1930F
  • Tool Supported: QPST Tool – QFIL Qualcomm Flash Image Loader
  • Processor: Qualcomm
  • Os Ver: Android 9.0


Pre-requirements to Install Vivo Y11 2019 PD1930F Stock ROM:

  • Supported Phone: Vivo Y11 2019 PD1930F
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Vivo Y11 2019 PD1930F Full Backup

Before going to install Vivo Y11 2019 PD1930F stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

Download Vivo Y11 2019 PD1930F Flash Tool And Drivers:

A.  Download and install Vivo Y11 2019 PD1930F Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the QFIL QPST Flash Tool for as Vivo Y11 2019 PD1930F Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash Vivo Y11 2019 PD1930F Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Stock ROM using QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.

How to Install PD1930F_EX_A_1.12.9 update on Vivo Y11 2019:

  • Download Firmware update Package From above and Move it to Device Storage.
  • Now Switch Off Phone and together Press Power and Volume up Button until device Logo appears then Release, Your Phone booted in fastboot mode Now Select Recovery mode.
  • Your Phone booted in Recovery. Click Wipe Data and Wipe all Data
  • Now Select Install update and then Locate Downloaded Firmware File From Storage.
  • Click Install. wait until Success. then Reboot System Now.


  • Please read and understand the Full Guide before flashing “Vivo Y11 2019 PD1930F Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Back to top button