Vivo Nex PD1806 Firmware Flash File [Android 8.1]

Vivo Nex PD1806 Firmware

Welcome To all in one thread for Vivo Nex PD1806 in this post I will share all kinds of Vivo Nex PD1806 Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Vivo Nex PD1806 software upgrade.

Download Firmware/Flash File For Vivo Nex PD1806:

“Vivo Nex PD1806 Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Vivo Nex PD1806 Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per their desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Vivo Nex PD1806 Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Pre-requirements:

  • Supported Phone: Vivo Nex PD1806
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Take Vivo Nex PD1806 Full Backup

Before going to install Vivo Nex PD1806 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download Vivo Nex PD1806 Flash Tool And Drivers:
  • A.  Download and install Vivo Nex PD1806 Drivers. The necessary communication between your device and PC.
  • These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
  • B. We use the QFIL QPST Flash Tool as Vivo Nex PD1806 Flash Tool because this tool is very efficient and support all kind of Qualcomm phones.

Firmware Information:

Device Name: Vivo Nex PD1806
Type: Full ROM+ OTA’s
ROM Size: up to 6GB
SoC: QCOM SD710
Os: Android 8.1
Password:  Null
Gapps: Included
Root access: Not
Firmware Version: 
PD1806_A_7.7.18_vivo_qcom_LA.UM.7.8.r1-01800-SDM710_split

[quads id=2]

PD1806_A_7.7.18 QPST: Firmware/Flash File

Instructions to Flash Vivo Nex PD1806 Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY, and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the Vivo Nex PD1806 ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed Stock ROM using the QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Vivo Nex PD1806 Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM must have a 70–80% charge.