Konrow K-TAB 1005 Firmware Flash File – Android 11 R

AsimSaturday, Nov 05 2022 5:22PM

88 1 minute read

Konrow K-TAB 1005 Firmware

Download Firmware/Flash File For Konrow K-TAB 1005:

The specific Konrow K-TAB 1005 Firmware comes with a Stock ROM of Konrow K-TAB 1005. This helps you to bypass the FRP lock and revert from the root and custom ROM.

There are various reasons to flash ( Firmware on Konrow K-TAB 1005 ).

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Stock Firmware:

Flash Stock ROM to unbrick your Konrow K-TAB 1005
Update and downgrade
Unroot or fix bugs on the phone
To solve the lag or stutter
Fix software issues.
Revert to stock to get your warranty
Keeps rebooting issue
If your phone boots straight into recovery
Phone boots straight into its bootloader

Firmware Information:

Device Name:	Konrow K-TAB 1005
ROM Type:	Full ROM
SoC:	unisoc
OS:	Android 11
Password:	Null
Root Access:	No
Region:	GLO
Firmware Version:	K-TAB1005_20210607

[quads id=2]

Download Links

1400_YouCheng_S706_9832E_K-TAB1005_20210607

Requirements:

Charge your mobile: Your phone may no less than a half charge.
Laptop or PC: To execute this installation, you must use a PC or Laptop.
1. Take Konrow K-TAB 1005 Full Backup

Before going to install Konrow K-TAB 1005 Firmware you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download Konrow K-TAB 1005 Flash Tool And Drivers:
A. Download and install Konrow K-TAB 1005 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by the SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Spreadtrum flash tool as Konrow K-TAB 1005 Flash Tool because this tool is very efficient and support all kind of SPD phones.

Instructions to Flash Konrow K-TAB 1005 Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download the Konrow K-TAB 1005 Firmware flash file.

3: Extract Spreadtrum Upgrade Tool on your computer.

4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the Konrow K-TAB 1005 ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.

8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Konrow K-TAB 1005 Stock ROM using the SPD Flash tool.

Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.

Disclaimer:

Read and understand the Full Guide before flashing.”Konrow K-TAB 1005 Firmware”.
Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
Before flashing, Stock ROM on Konrow K-TAB 1005 must have a 70–80% charge.

Bin Packet load Error When Flashing “Konrow K-TAB 1005 Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Konrow K-TAB 1005 Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.