Home Stock Firmware Itel Itel W5006S Firmware Flash File – Android 10 Q

Itel W5006S Firmware Flash File – Android 10 Q

Itel W5006S Firmware

The specific Itel W5006S Firmware comes with a Stock ROM of Itel W5006S. This helps you to bypass FRP lock and revert from the root and custom ROM.

Download Firmware/Flash File For Itel W5006S:

There are various reasons to flash (Firmware on Itel W5006S).

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Itel W5006S Firmware:

  • Flash Stock ROM to unbrick your Itel W5006S
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Requirements:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • 1. Take Itel W5006S Full Backup

Before going to install Itel W5006S stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • 2. Download Itel W5006S Flash Tool And Drivers:
  • A.  Download and install Itel W5006S Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by the SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

  • B. We use the Spreadtrum flash tool as Itel W5006S Flash Tool because this tool is very efficient and support all kind of SPD phones.
Flash File Name:  W5006S-F3112-10.0-MX-V017-20211109
Android Version:  Android 10
Soc: Spreadtrum
Gapps: 
Included
File Size:
1.2 GB
[quads id=2]
Download Droid File Host

Instructions to Flash Itel W5006S Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download the Itel W5006S flash file.

3: Extract Spreadtrum Upgrade Tool on your computer.

4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the Itel W5006S ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.

8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed Itel W5006S Stock ROM using the SPD Flash tool.

Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Itel W5006S Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM on Itel W5006S must have a 70–80% charge.

Bin Packet load Error When Flashing “Itel W5006S Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Itel W5006S Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Exit mobile version