Alldocube iPlay 50 Firmware Flash File – Android 11 R

0 145 1 minute read

Alldocube iPlay 50 Firmware

The Alldocube iPlay 50 is a powerful and affordable tablet that packs a punch. Featuring an 8-core processor, 4GB of RAM, 64GB of storage, and an Android 10 operating system out of the box, this device provides plenty of power for running multiple apps simultaneously without any lag.

Additionally, it has dual cameras on the front and back giving you great picture quality when taking photos or video calling with friends. With its long battery life, you can enjoy your favorite movies or shows all day long without having to worry about recharging too often.

The specific Alldocube iPlay 50 Firmware comes with a Stock ROM of Alldocube iPlay 50. This helps you to bypass FRP lock and revert from the root and custom ROM.

Table of Contents

Download Firmware/Flash File For Alldocube iPlay 50:
- The Benefit Of Stock Firmware:
  - Firmware Information:

Download Firmware/Flash File For Alldocube iPlay 50:

There are various reasons to flash (Firmware on Alldocube iPlay 50).

For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Stock Firmware:

Flash Stock ROM to unbrick your Alldocube iPlay 50
Update and downgrade
Unroot or fix bugs on the phone
To solve the lag or stutter
By flashing Stock ROM, you can fix software issues.
Revert to stock to get your warranty
Keeps rebooting issue
If your phone boots straight into recovery
Phone boots straight into its bootloader

Firmware Information:

Device Name:	Alldocube iPlay 50
ROM Type:	Full ROM
SoC:	unisoc
OS:	Android 11
Password:	Null
Root Access:	No
Firmware Version:	check below list

[quads id=2]

Download Links

Requirements:

Charge your mobile: Your phone may no less than a half charge.
Laptop or PC: To execute this installation, you must use a PC or Laptop.
1. Take Alldocube iPlay 50 Full Backup

Before going to install Alldocube iPlay 50 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download Alldocube iPlay 50 Flash Tool And Drivers:
A. Download and install Alldocube iPlay 50 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by the SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Spreadtrum flash tool as Alldocube iPlay 50 Flash Tool because this tool is very efficient and support all kind of SPD phones.

Instructions to Flash Alldocube iPlay 50 Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download the Alldocube iPlay 50 flash file.

3: Extract Spreadtrum Upgrade Tool on your computer.

4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the Alldocube iPlay 50 ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.

8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Alldocube iPlay 50 Stock ROM using the SPD Flash tool.

Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.

Disclaimer:

Please read and understand the Full Guide before flashing “Alldocube iPlay 50 Firmware”.
Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
Before flashing, Stock ROM on Alldocube iPlay 50 must have a 70–80% charge.

Bin Packet load Error When Flashing “Alldocube iPlay 50 Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Alldocube iPlay 50 Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.