How To Flash Cubot X19 Firmware File [ROM]

Download Cubot X19 Firmware from right here. flash it in your device and enjoy the native Android expertise once more. The download file contains the USB driver, flash tool, and the Cubot X19 scatter file.

Cubot X19 Firmware

This article contains the Cubot X19 Firmware Flash File. That will allow you to recover your Cubot X19 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. Besides these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

There are different reasons why we will use Sp Flash Tool to unbrick the Cubot X19. I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Cubot X19.

The Advantages Of Cubot X19 Stock Firmware:

  • Flash Stock To Unbrick your Cubot X19
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Cubot X19
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Cubot X19
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Cubot X19 Of Stock ROM Details:

  • Gapps File: Included
  • Device Supported: Cubot X19
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6763
  • Os: Android 8.1.0 Oreo

Download

CUBOT_X19_9021C_V12_20190219_20190219-1847 .zip

Pre-requirements to Install Cubot X19 Firmware:

  • Supported Phone: Cubot X19
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Cubot X19 Backup:

Download Cubot X19 Flashing Tool And Drivers:

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Cubot X19 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM Cubot X19 must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Cubot X19 Firmware:

1. Download Cubot X19 stock ROM zip file given above and extract it in your computer.

2. Download Cubot X19 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Cubot X19 smartphone and take away the battery (it’s removable).

Switch Off Cubot X19

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

Start SPFT For Cubot X19 Firmware Flash

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

Cubot X19 Firmware Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

Select Cubot X19 Firmware

8. Now click on on the “Download” button to start out the flashing process.

Press Download For Cubot X19 Firmware

9. Next, join your Cubot X19 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

Cubot X19 Firmware Download Complete

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Cubot X19 Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction Cubot X19 Firmware Flashing With Sp Flash Tool.

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close