How To Flash Bellphone BP 326 Forte Firmware File

At some point, while using Bellphone BP 326 Forte, you’ll probably encounter a situation in which you need to flash Bellphone BP 326 Forte Firmware File. You might need a Bellphone BP 326 Forte stock ROM how do you make sure the flashing process goes off without a hitch?

That’s what we’re going to tell you in this post! To do it, we’ll use a free flashing tool called Sp Flash Tool. This tool will enable you to flash stock ROM of your Bellphone BP 326 Forte and set up on a new Firmware.

Bellphone BP 326 Forte Firmware

Bellphone BP 326 Forte Stock Rom is the software which is provided by the vendor or You may say that the software. which was installed by the manufacturer of the phone is Stock Rom. the other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire.

Flashing a Bellphone BP 326 Forte Firmware means installing the system image into the device’s internal flash memory. Flash memory holds Android’s firmware. the same as most other portable devices with an embedded OS.

We will use the SPD Download Tool to unbrick the Spreadtrum Devices With Bellphone BP 326 Forte Flash File. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your SPD Phone.

The Benefit Of Bellphone BP 326 Forte Stock Firmware:

  • Flash Stock To Unbrick your Bellphone BP 326 Forte
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Bellphone BP 326 Forte
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Bellphone BP 326 Forte
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Bellphone BP 326 Forte Stock ROM Details:

Download Bellphone BP 326 Forte Flash File

Gapps File Included
Device Supported Bellphone BP 326 Forte
Tool Supported SPD Flash Tool
Processor 7731C
Os Android
Download 7731C_fs286_NDE_A522A_BP326_Forte_V01_4X2_PLS_2SIM_Full.rar

Pre-requirements to Install Bellphone BP 326 Forte Firmware:

  • Supported Phone: Bellphone BP 326 Forte
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Bellphone BP 326 Forte Backup:

Bellphone BP 326 Forte Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Bellphone BP 326 Forte Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Bin Packet load Error When Flashing Bellphone BP 326 Forte Firmware: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Bellphone BP 326 Forte Firmware: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Instructions to Install Bellphone BP 326 Forte Firmware:

  1. Install Spreadtrum Drivers.
  2. Install the SPD Download Tool.
  3. Open the Research download tool > bin folder.
  4. Launch ResearchDownload.exe.
  5. Click on the Load Packet icon (top left corner).
  6. In the window that pops up, navigate to the location of the Bellphone BP 326 Forte Firmware.pac file, select it then click Open.
  7. The PAC file should now be loaded (its name should appear at the top).
  8. Click the Settings Icon (top left corner).
  9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
  10. Click the Start downloading button.
  11. You should see Waiting…. under the Progress bar.
  12. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.
  13. Once flashing is complete, you’ll see Passed.
  14. Click on the Stop downloading icon then disconnect the phone from PC and boot.

itel A16 Stock Firmware Flash File

Follow Detailed Instruction Bellphone BP 326 Forte Firmware Flashing With Spd Flash Tool.

Search Tags:

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for