How To Flash Atel K100 Firmware File

if you are facing Atel K100 firmware issue. Then you can fix issues like that at home without any help of a software technician. in fact not all of the issues that are the hardware fault.

Today we will discuss how to sort out Atel K100 Stock Rom issue. There are several methods to Flash Atel K100 Firmware. Of course, there are also some custom mods and ROMs that you can try.

Atel K100 Firmware

However, if you do not like the custom ROMs you have installed and want to go back to the original operating system, we have the guide for you.

If you are looking for this guide, we will now see how you can flash the stock firmware on Atel K100.

We are going to Flash Stock ROM on Atel K100. In this guide, we have used the SP Flash Tool to flash the Atel K100 Firmware.

And we include the Official link to Download Atel K100 Stock ROM and all Needed Files. your device may get bricked And flashing stock ROM is the only way to go out.

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a Comment.

We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Atel K100. I believe this tool is very efficient.

Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Atel K100.

The Advantages Of Atel K100 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Atel K100 is stuck in a boot loop, and as the name implies, is caused by a software error on Atel K100.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the stock ROM on Atel K100 through recovery or with SP Flash Tool.

If your Atel K100 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Atel K100 Stock ROM Details:

Gapps FileIncluded
Device SupportedAtel K100
Tool SupportedSP Flash Tool
ProcessorMediaTek MT6577
Download Atel K100 MT6577

Pre-requirements to Install Atel K100 Firmware:

  • Supported Phone: Atel K100
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Atel K100 Backup:

Download Atel K100 Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Atel K100 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM Atel K100 must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Atel K100 Firmware:

1. Download Atel K100 Firmware zip file given above and extract it in your computer.

2. Download Atel K100 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Atel K100 smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Atel K100 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed Atel K100 stock ROM on your Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction Atel K100 Firmware Flashing With Sp Flash Tool.

Leave a Reply

Your email address will not be published. Required fields are marked *