The Spectrum Cable Remote does not work with Cable Box? Here are some solutions you can try.
When it comes to watching TV at home, there are so many options available to you. If you wish to stick with cable network TV, you could use one of the cable box devices provided by popular networks such as Spectrum or AT&T, or you could opt for internet-based streaming services. There is a remote control included with cable boxes like Spectrum that allows you to control a variety of features.
Several technology products, including cable boxes, use the remote. You can change channels, adjust volume, as well as adjust settings for your audio and video outputs using the remote. However, what can you do if your Spectrum cable box’s remote isn’t working? Here are some troubleshooting methods you can try.
6 Methods To Fix Spectrum Remote Not Working With Cable Box
Before you buy a new remote for your spectrum cable box, learn what is wrong with it and try to fix it before you go out and buy a new one. I always check whether a remote can be repaired before buying it because I like to know if it can be fixed or not.
Also, you save money instead of buying a new remote just to find out that your old one had a small problem that could be easily fixed. You can therefore try these steps before buying a brand-new remote for your Spectrum cable box.
Check The Batteries
It is powered by the batteries in your Spectrum cable box remote control. Batteries in the remote are susceptible to becoming weak, so they cannot function properly if they are weak. In this case, you need to power down the cable box and the television. The old batteries should now be removed from the remote’s battery compartment by opening its back cover. You should also check to make sure the batteries don’t have any deformations or leaks.
Get yourself a new set of batteries and insert them in the battery compartment. Ensure that your TV and cable box are powered on. See if everything works by using the remote control. Batteries may have been the problem, so the remote should be working just fine. Next, you can try the next method if the remote doesn’t work.
Restart The Cable Box
Depending on whether the batteries in the remote were just fine, you might just want to restart the cable box. It is possible that the remote does not work because the spectrum cable box is temporarily unable to detect it due to a bug. Switch off the Spectrum cable box and unplug it from the power source in this case. You don’t have to worry about formatting or resetting the cable box if you unplug it from the power source. It is a good idea to leave the cable box unplugged for a few minutes after it has been unplugged.
After the timer has expired, you can plug the cable box back into its power source and turn it on. Try using the remote again to see if any functions work. In this case, your remote is working perfectly, and a small restart of your Spectrum cable box was all that was required.
Check Buttons On The Remote
Considering that the robot is the most used device, it is highly likely to become dirty. Spectrum cable box remote buttons can get dirty when they get dirty, resulting in dirt sliding into the slots. It is common for the buttons of the remote to get jammed into the device once the dirt settles in. The Spectrum cable box will not capture other button presses on the remote if a button is kept pressed for a long period of time. If any of the buttons are stuck or pressed in, pick up a toothpick or a sim ejector tool and clear out the dirt, then try pressing the button again.
Clean The Remote and The Cable Box
Infrared is used by Spectrum’s cable box remote to communicate between the two devices, both devices need to be within the same line of sight for communication to take place. It must also be clean and free of dust or anything else that could interfere with the sensors. If there is any dust or dirt on the remote, clean the top of the remote as well as the front portion of the Spectrum cable box with a soft, dry cloth. When the remote has been cleaned, it should be tested. You should be able to use the cable box from Spectrum just as well.
Check For Damages And Loose Parts
If the outside of the remote is damaged, the remote will malfunction and won’t work. Check for any physical damages. If there is any sound of loose bits and pieces hitting the internal body of the remote, gently shake the device and listen for any sounds. Until you have a new replacement remote or the remote is damaged in a way it cannot be repaired, you will have to listen out for too much noise or replace the remote.
Reset Spectrum Cable Box Remote
You can solve many issues that you may have had with the device by simply resetting it or performing a factory reset, as with a lot of other electronics out there. In addition to that, you can also reset the remote for your Spectrum cable box. Please find below the steps that you need to follow in order to reset your Spectrum cable box remote. Here is a detailed guide.
-
Press the TV button on the remote control of your Spectrum cable box.
-
While holding the TV button, press the OK button on your remote control.
-
Release both buttons.
-
There will be flashing lights on the AUX, TV, and DVD buttons. In this case, the light on the TV button will remain on.
-
Press and hold the Delete button for three seconds.
-
During this time, the Tv button will blink and then turn off.
-
This is how you can perform a factory reset on your Spectrum cable box remote.
Replace The Remote
It is best to consider getting a new cable box remote if none of the troubleshooting methods worked for you. Getting a replacement is as simple as visiting your local Spectrum store. Alternatively, if there are no stores close to you, you might want to consider getting a universal remote control. Your cable box as well as your TV can be controlled with ease with the universal remote control. The remote will work right out of the box if it is programmed manually or automatically.
Conclusion
This concludes the troubleshooting guide to solve Spectrum cable box remote not working at all. Most of the time, the issue with remotes can be fixed easily. In rare cases, you might want to get a replacement remote right away. Or, you can contact Spectrum support and ask what options they have for your remote. Sometimes they have a mail-in option where they will replace your remote and you will receive it in the mail within a couple of days. Let us know if you have any questions or concerns in the comments section below.