Newman K18C Firmware Flash File [Stock ROM]

Newman K18C Firmware

If your Newman K18C mobile has been damaged for any reason. And you want to fix it at home by flashing Newman K18C firmware. So your search on the Internet has ended.

 Today I tell you the easy way to flash Newman K18C firmware. By following which you can make your phone back to work again. Yes. All the following software are free of charge in this article

.This article contains the Newman K18C Firmware Flash File. That will allow you to recover your Newman K18C mobile into its initial Factory state.

Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

Newman K18C Firmware Flash File [Stock ROM]:

We will use Sp Flash Tool to unbrick the Newman K18C. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Newman K18C.

[quads id=2]

The Advantages Newman K18C Firmware:

  • Flash Stock To Unbrick your Newman K18C
  • Fix boot loop issue
  • Update and Downgrade Newman K18C
  • Unroot or Fix Bugs
  • To solve the lag or stutter on Newman K18C
  • Fix software issues.
  • Return to stock for warranty coverage.

Newman K18C Firmware Details:

  • Gapps File: Included
  • Device Supported: Newman K18C
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6592
  • Os: Android 4.2.2

Download

[quads id=2]

Pre-requirements to Install Newman K18C Firmware:

  • Supported Phone: Newman K18C
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Phone Backup:

Newman K18C Flashing Tool And Drivers:

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Newman K18C Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Newman K18C Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download Newman K18C Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction Newman K18C Firmware Flashing With Sp Flash Tool.

You may also like...