Follow Detailed Instruction MLS iQTalk iQ1280 Firmware Flashing With Sp Flash Tool.
MLS iQTalk iQ1280 Firmware Flash File [Stock ROM]
If you are trying to Flash MLS iQTalk iQ1280 Firmware download only CDC and VCOM drivers as ADB drivers will not help in it. Here we will provide free download for Download MLS iQTalk iQ1280 firmware. If you are looking forward to how to download and install this MLS iQTalk iQ1280 then read all the steps.
This article contains the MLS iQTalk iQ1280 Firmware Flash File. That will allow you to recover your MLS iQTalk iQ1280 mobile into its initial Factory state.
Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.
We will use Sp Flash Tool to unbrick the MLS iQTalk iQ1280 as we use for MLS diamond. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your MLS iQTalk iQ1280.
The Advantages of MLS iQTalk iQ1280 Firmware:
- Flash Stock To Unbrick your MLS iQTalk iQ1280
- Fix boot loop issue
- Update and Downgrade MLS iQTalk iQ1280
- Unroot or Fix Bugs
- To solve the lag or stutter on MLS iQTalk iQ1280
- Fix software issues.
- Return to stock for warranty coverage.
MLS iQTalk iQ1280 Firmware Details:
- Gapps File: Included
- Device Supported: MLS iQTalk iQ1280
- Tool Supported: SP Flash Tool
- Processor: MediaTek MT6735M
- Os: Android 5.1 Lollipop
Download
MLS_iQTalk_iQ1280_MT6735M_20161101_5.1.zip
Pre-requirements to Install MLS iQTalk iQ1280 Firmware:
- Supported Phone: MLS iQTalk iQ1280
- Charge your mobile: You may no less than a half charge.
- Laptop or PC.
Take Phone Backup:
MLS iQTalk iQ1280 Flashing Tool And Drivers:
- MLS iQTalk iQ1280 Flash Tool: Download the latest SP Flash tool and extract it (Install)
- MLS iQTalk iQ1280 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
- Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)
Disclaimer:
- Please read and understand the Full Guide Before Flashing MLS iQTalk iQ1280 Stock ROM.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Instructions to Install MLS iQTalk iQ1280 Firmware:
Step 1: Extract And Run SP flash tool.
Step 2: Install MTK android USB drivers.
Step 3: Then download MLS iQTalk iQ1280 Firmware.
Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
Step 5: Now open SP flash tool.exe.
Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.
Step 7: In the download tab, click on the scatter load button.
Step 8: After locating the scatter tab, click on the download button.
Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
Step 10: When flashing is completed, a green ring will appear in the SP flash tool.
Step 11: Close the SP flash tool on your computer and unplug the phone.
Step 12: Power on the phone and enjoy it.
Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
