How To Flash Gionee P5l Firmware File

At some point, while using Gionee P5l, you’ll probably encounter a situation in which you need to flash Gionee P5l Firmware. You might need a Gionee P5l stock ROM how do you make sure the flashing process goes off without a hitch?

Gionee Pioneer P5L (2016) is powered by a 1.3GHz quad-core processor. It comes with 1GB of RAM.

The Gionee Pioneer P5L (2016) runs Android 5.1 and is powered by a 2,300mAh removable battery.

As far as the cameras are concerned, the Gionee Pioneer P5L (2016) on the rear packs 8-megapixel camera. It sports a 5-megapixel camera on the front for selfies.

The Gionee Pioneer P5L (2016) runs Amigo 3.1 UI based on Android 5.1 and packs 16GB of inbuilt storage that can be expanded via microSD card (up to 128GB). The Gionee Pioneer P5L (2016) is a dual-SIM (GSM and GSM) smartphone that accepts Regular and Regular cards.

Connectivity options on the Gionee Pioneer P5L (2016) include Wi-Fi, GPS, Bluetooth v4.00, FM radio, 3G, and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include accelerometer, ambient light sensor, gyroscope, and proximity sensor.

The Gionee Pioneer P5L (2016) measures 143.50 x 72.00 x 8.30mm (height x width x thickness) and weighs 147.00 grams. It was launched in Red, White, Black, Blue, Yellow, and Gold colors.

Gionee P5l Firmware

This article contains the Gionee P5l Firmware Flash File. That will allow you to recover your Gionee P5l mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. Besides these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

There are different reasons why we will use Sp Flash Tool to unbrick the Gionee P5l. I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Gionee P5l.

The Advantages Of Gionee P5l Stock ROM:

  • Flash Stock To Unbrick your Gionee P5l
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Gionee P5l
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Gionee P5l
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Gionee P5l Stock ROM Details:

Gapps File Included
Device Supported Gionee P5l
Tool Supported SP Flash Tool
Processor MediaTek MT6572
Os Android 5.1 Lollipop
Download Gionee_P5L_T5287.zip

 

Pre-requirements to Install Gionee P5l Firmware:

  • Supported Phone: Gionee P5l
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Gionee P5l Backup:

Download Gionee P5l Flashing Tool And Drivers:

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Gionee P5l Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • In addition, Make sure that the USB drivers for your device are installed on the computer.
  • Before flashing, Stock ROM Gionee P5l must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Gionee P5l Firmware:

1. Download Gionee P5l Firmware zip file given above and extract it in your computer.

2. Download Gionee P5l USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Gionee P5l smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your Gionee P5l Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two. As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed Gionee P5l stock ROM on your  Android device. If you happen to encounter any points whereas following this tutorial, do let me know by way of feedback.

Follow Detailed Instruction Gionee P5l Firmware Flashing With Sp Flash Tool.

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for aiomobilestuff.com

Close