G-Tide C3 Firmware Flash File [Stock ROM]

This specific Firmware Download Package For G-Tide C3 comes with a Stock ROM of G-Tide C3. USB drivers, Flash tool for Installing the firmware and a brief guide.

To help you in installing the G-Tide C3 Stock Firmware. G-Tide C3 Firmware is a set of programs and software installed on the ROM. it also is known as G-Tide C3 Flash File and G-Tide C3 Stock ROM.

That firmware update is only for G-Tide C3. Don’t try to install that firmware on other models of MTK Android devices that can destroy your phone.G-Tide C3 Firmware Flash File [Stock ROM] This article contains the G-Tide C3 Firmware Flash File. That will allow you to recover your G-Tide C3 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

G-Tide C3 Firmware Flash File [Stock ROM]:

We will use Sp Flash Tool to unbrick the G-Tide C3 as we use for G-Tide G-PAD 7. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your G-Tide C3.

[quads id=2]

The Advantages G-Tide C3 Firmware:

  • Flash Stock To Unbrick your G-Tide C3
  • Fix boot loop issue
  • Update and Downgrade G-Tide C3
  • Unroot or Fix Bugs
  • To solve the lag or stutter on G-Tide C3
  • Fix software issues.
  • Return to stock for warranty coverage.

G-Tide C3 Firmware Details:

  • Gapps File: Included
  • Device Supported: G-Tide C3
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6572
  • Os: Android 4.4.2

Download

[quads id=2]

Pre-requirements to Install G-Tide C3 Firmware:

  • Supported Phone: G-Tide C3
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Phone Backup:

G-Tide C3 Flashing Tool And Drivers:

Disclaimer:

  • Please read and understand the Full Guide Before Flashing G-Tide C3 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install G-Tide C3 Firmware:

Step 1: Extract And Run SP flash tool.

Step 2: Install MTK  android USB drivers.

Step 3: Then download G-Tide C3 Firmware.

Step 4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

Step 5: Now open SP flash tool.exe.

Step 6: When the SP flash tool opens, go to the download button in the SP flash tool.

Step 7: In the download tab, click on the scatter load button.

Step 8: After locating the scatter tab, click on the download button.

Step 9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

Step 10: When flashing is completed, a green ring will appear in the SP flash tool.

Step 11: Close the SP flash tool on your computer and unplug the phone.

Step 12: Power on the phone and enjoy it.

Step 13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Follow Detailed Instruction G-Tide C3 Firmware Flashing With Sp Flash Tool.