If you own a Galaxy S23+ SM-S916B smartphone and want to upgrade your device’s firmware to the S916BXXU3BWJM version, this guide is for you. The latest firmware version for the Galaxy S23+ SM-S916B U3 is 2023-10-01 (October 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.
Samsung Galaxy S23+ SM-S916B Binary 3 Android 14 Panama TPA S916BXXU3BWJM
Download Galaxy S23+ SM-S916B U3 Latest Firmware:
Model | SM-S916B Binary 3: U3, S3, Bit 3 |
Region / Country | Panama |
Language | Multi-Language |
Android Version | Android 14 One UI 6.0 |
Operator / Carrier | Clear TPA (without logo, operator apps) |
AP/PDA | S916BXXU3BWJM |
CSC | S916BOWO3BWJM |
Modem CP Version / Baseband | S916BXXU3BWJM |
Product code | TPA |
Build / Release Date | 2023-10-31 |
Security Patch Level | 2023-10-01 (October 1, 2023) |
Size | 9.2GB |
Download | Google Drive |
Preparation:
- Supported Phone: Galaxy S23+ SM-S916B
- Charge your mobile: You may charge no less than a half charge.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
How To Install Galaxy S23+ SM-S916B U3 Stock Firmware:
1: Install the Samsung USB Driver on your PC.
2: Download and extract the Galaxy S23+ SM-S916B U3 Firmware files on your computer.
3: Now, switch off your smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In the Download mode, you will see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.
6: Open Odin. Then, connect your phone to the PC.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the flashing.
10: Flashing usually takes 30–50 seconds to complete the process on your phone.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
When your Galaxy S23+ SM-S916B U3 finally boots up, you should run your desired firmware.
If you want to check that the correct firmware is installed, head to Settings > About Phone > Software